RISCOS.com ShopAll our products in one place. |
10BaseT (RJ45) Network interface for RiscPCThis interface board plugs into the network socket on a RiscPC, A7000 or A7000+ motherboard. These interfaces have been pulled from working computers and reconditioned by APDL in London. You will need a suitable network cable. | |
10BaseT (RJ45) and 10base2 (BNC) Network interface for RiscPCThis interface board plugs into the network socket on a RiscPC, A7000 or A7000+ motherboard. These interfaces have been pulled from working computers and reconditioned by APDL in London. You will need a suitable network cable. | |
Three button serial mouseThis mouse plugs into the serial port of any Acorn RISC OS computer. It has the same three button layout as a genuine Acorn mouse and is compatible with all RISC OS applications. | |
Floppy disc and sold state storage power adapters cableThis cable plugs into a normal four pin Molex/AMP power socket at one end and on the other end has a small four pin power socket as used on floppy disc drives. This cable can also be used to provide power for most solid state storage adapters. | ||
|
Dual IDE cableThis cable plugs into a normal IDE interface (either single or dual channel) and can connect up to two devices (for example a harddisc and CD reader). It's suitable for use with the IDE interface on the motherboard of most RISC OS computers. It's also suitable for any third party interfaces that use a full size IDE socket. | ||
|
DataSafe SparQ drive with 1GB cartridgeA great cost effective way of adding extra storage, either as a backup device or as the main hard disc for a RISC OS computer with bi-directional parallel port. Brand new old stock with all cables, power supply and a 1GB cartridge. You can buy further cartridges from us if you need more storage. | ||
|
DataSafe SparQ drive 1GB cartridgeA single 1GB SparQ disc for use with our DataSafe SparQ drives. The disc will hold up to 1GB (that's over 650 floppy discs) of data and provides high speed storage for our parallel port SparQ drives. Comes complete with plastic storage box. Supplied PC formatted unless requested. | ||
|
RISC OS driver for SparQ and EZ230This is the same driver we supply with our parallel port SparQ drives. It will work with the SparQ and the EZ230 drives. Versions for RiscPC, A7000 and some earlier machines are included along with... | ||
|
RiscPC Second slice drive cradleThis cradle is designed to fit into a RiscPC second slice and allows another 3.5" harddrive to be fitted in the space that's normally used for an optical drive (CD/CD-R etc). The cradle comes complete with a fitting kit with the appropriate screws and a red LED disc activity light. | ||
|
Fujitsu MPE3136AT 13.7GB IDE Hard DriveA standard 3.5" IDE harddisc. These drives were removed from working PCs when they were upgraded. APDL purchased a large number of these drives as they we from low stress environments and were taken out of service before the MTBF had been reached. The drives were then soak tested and reformatted by APDL. | |
160GB Seagate Barracuda IDE Hard DriveA standard 3.5" IDE harddisc. These drives were removed from working PCs when they were upgraded. APDL purchased a large number of these drives as they we from low stress environments and were taken out of service before the MTBF had been reached. The drives were then soak tested and reformatted by APDL. | ||
|
8MB SIMM for RiscPC/A7000A standard 8MB SIMM (Single Inline Memory Module) suitable for RiscPC or A7000/A7000+ computers. When used in the RiscPC it can be fitted on its own to provide 8MB or a pair can be fitted to provide 16MB. if you order two of these SIMMs they will be supplied as a matched pair (same manufacturer/make/model). | ||
|
32MB SIMM for RiscPC/A7000A standard 32MB SIMM (Single Inline Memory Module) suitable for RiscPC or A7000/A7000+ computers. When used in the RiscPC it can be fitted on its own to provide 32MB or a pair can be fitted to provide 64MB. if you order two of these SIMMs they will be supplied as a matched pair (same manufacturer/make/model). | |
64MB SIMM for RiscPC/A7000A standard 64MB SIMM (Single Inline Memory Module) suitable for RiscPC or A7000/A7000+ computers. When used in the RiscPC it can be fitted on its own to provide 64MB or a pair can be fitted to provide 128MB. if you order two of these SIMMs they will be supplied as a matched pair (same manufacturer/make/model). | ||
|
128MB SIMM for RiscPC/A7000A standard 128MB SIMM (Single Inline Memory Module) suitable for RiscPC or A7000/A7000+ computers. When used in the RiscPC it can be fitted on its own to provide 128MB or a pair can be fitted to provide 256MB. if you order two of these SIMMs they will be supplied as a matched pair (same manufacturer/make/model). | |
1MB VRAM module for RiscPCA standard 1MB VRAM module for the RiscPC. Fitting VRAM to a RiscPC allows the machine to display higher resolutions with more colours. In addition the video circuitry will switch to a higher clock speed making the entire machine noticably quicker. | |
2MB VRAM module for RiscPCA standard 2MB VRAM module for the RiscPC. Fitting VRAM to a RiscPC allows the machine to display higher resolutions with more colours. In addition the video circuitry will switch to a higher clock speed making the entire machine noticably quicker. | |
Dual slot backplane for RiscPCThis allows two expansion cards (Podules) to be fitted to a RiscPC computer. The backplane is connected to a socket on the RiscPC motherboard and can be used with all RiscPC computers. DMA access is provided to the lower socket (excluding Kinetic Processor) to support high speed IDE/SCSI interfaces. Genuine Acorn component reconditioned by APDL. | |
Quad slot backplane for RiscPCThis allows four expansion cards (Podules) to be fitted to a RiscPC computer. The backplane is connected to a socket on the RiscPC motherboard and can be used with all RiscPC computers. DMA access is provided to the lower socket (excluding Kinetic Processor) to support high speed IDE/SCSI interfaces. Genuine Acorn component reconditioned by APDL. | ||
|
© Copyright 3QD Developments - 13/10/2024