Configuration System: Dump

Dump

This lets you configure the behaviour of the automatic diagnostic dump generation.

Firstly you can enable or disable the dump system. You can set the type of diagnostic dump that will be generated, for most users the Entire application option should be selected. You can also set the Dump system to automatically open a filer window containing the dump information.

You are very unlikely to need to use the Dump facility in normal use, but it may help in diagnosing problems with RISC OS should you encounter any.

This documentation is copyright 3QD Developments Ltd 2013 and may not be reproduced or published in any form without the copyright holder's permission. RISC OS is subject to continuous development and improvement as such all information is provided by 3QD Developments Ltd in good faith and is believed to be correct at the time of publication E&OE. 3QD Developments Ltd cannot accept any liability for any loss or damage arising from the use of any information provided as part of the RISC OS Documentation.

HTML document version r23142 (3rd November 2015)